Metal detector METO-7
Metal detector METO-7 is designed for locating metal objects in ground, concrete, under soil or snow etc.
The versatile construction allows the consumer to assemble the metal detector for different applications. The units may be assembled into a short handle detector or a long handle detector. The metal detector may be used either with headphone or buzzer.
METO-7 has the dynamic mode for detection the metallic targets. Metal detector adjusts automatically and is easy to handle.
- socket for headphone or buzzer
- two-colour light indicator (LED).
On the side panel there is the rotary switch for power ON/OFF switching and sensitivity range regulation. The green LED light and audio tone are signalling the metal target detection. For transport the short handle metal detector may be folded up and placed into a special shoulder bag.
| Detection at 3. sensitivity range | |
| gold ring, 3 g | 8 cm |
| copper coin, R = 11 mm | 14 cm |
| copper plate, 80 x 80 mm | 31 cm |
| aluminium plate, 80 x 80 mm | 31 cm |
| steel plate, 80 x 80 mm | 33 cm |
| drainage well trapdoor | 90 cm |
| Number of sensitivity ranges | 3 |
| Low battery signal | visual (red LED) |
| Battery voltage | 9 V (PP3 size ALKALINE) |
| Operating endurance | Depending on battery type, min 40 h |
| Operating temperature | -30°C to +55°C |
| Protection level for electronic unit | IP65 |
| Coil diameter | 25 cm |
| Weight (with battery) | 720 g |