MS-3
Cable length measuring devices MS-30 and MS-31 are the stationary devices for the measurement of the length of cable, rubber and plastic pipes etc. in the shops, workshops, companies etc.
Cable length measuring devices enable to measure the length of the cables and pipes of different diameter. The measuring device is fastened to the table or strong basement.
The device has two counting modes :
- adding, pulling the cable etc. forward out of the device,
- subtracting, pulling it backward in reversed direction.
The reset to zero is possible by pushing the lever screwed on right side of the counter.
The application of the length measuring devices in the shops and workshops helps to increase the accuracy and diminish the timeconsuming process of measuring the right lengths of cables and pipes for the clients.
Measuring unit | MS-30: 1 cm MS-31: 1 dm |
| Counter accuracy | MS-30: +/- 1 % MS-31: +/- 1 % |
Plastic insulation cable allowed diameter range | 2 to 25 mm |
| Max measuring speed | MS-30: 60 m/min MS-31: 200 m/min |
| Accuracy | +/- 2 % |
| Display | MS-30: 5 digit, 999.99 m MS-31: 5 digit, 9999.9 m |
Temperature range | 0°C to +40°C at 65 % relative humidity |
| Dimensions | 120 x 190 x 210 mm |